ELECTRICOS PUSHBUTTON ENCLOSURES



  • Polyster Enclosures & Control Stations
  • Polycarbonate Enclosures & Control Stations
  • Die Cast Aluminium Enclosures & Control Stations
  • Conduit Hubs
  • Custom Control Stations

CONSTRUCTION

  • Available for 30mm and 22mm pilot devices.
  • Solid fiberglass reinforced polyester construction, lightweight with high impact resistance.
  • Non-conductive double insulated material.
  • Formed-In-Place (FIP) continuous polyurethane gasket that provides a complete watertight, dust tight environmental seal.
  • Recessed captive 316 Series stainless steel cover screws.
  • Designed for general electrical and electronic applications and any application that has an associated environmental concern.

CONSTRUCTION

  • Available for 30mm and 22mm pilot devices, and disconnect switches.
  • Rugged polycarbonate construction, high quality and sealed.
  • High temperature neoprene gasket.
  • Highly efficient seal provides ingress protection against dust and moistures.
  • For greater mechanical protection, the cover gasket is housed in a recess in the lid which mates up with a tongue.
  • Standard quarter turn quick release lid fixings.
  • Oil and corrosion resistant.
  • Standard color: Light Grey

CONSTRUCTION

Die Cast Aluminium Enclosures and Control Stations

  • Available for 30mm and 22mm pilot devices, and disconnect switches.
  • Die cast aluminum alloy construction.
  • High temperature neoprene gaskets are oil and petroleum resistant.
  • Highly efficient seal provides ingress protection against dust and moistures.
  • For greater mechanical protection, the cover gasket is housed in a recess in the lid which mates up with a tongue.
  • Oil and corrosion resistant.
  • Stainless steel captive lid retaining screws.
  • Standard finish: Smooth powder coat grey.

Hubs may be purchased separately, installed, or conduit hole only may be specified. If hub or conduit hole is specified, location must be indicated on order form.

Because the enclosures are symmetrical, a top hub or hole may be field installed with the hub used for bottom entrance, while side mounting may be used for either left or right entry.

We’ll configure and assemble enclosure stations in nearly any size and from a variety of materials to your specification. Ordering a custom enclosed control station is simple and offers advantages.

You’ll order your custom job under a single catalog number and your control station will arrive already assembled which means a shorter bill of material on your end, saving you installation time and cost. And pre-assembly also makes your inventory easier to manage.

There is a $4.00 assembly charge per pilot device unit.
Example: A two-unit station will have an assembly charge of $8.00.

Custom control stations are not available for guaranteed same day shipping.
Call us for pricing and an estimated date of delivery.

 

 

 

en_USEnglish
es_MXSpanish en_USEnglish

Categories