ELECTRICOS TERMINAL BLOCKS
-
IEC Terminal Blocks
-
High Intensity Terminal Blocks
-
NEMA terminal Blocks
IEC TERMINAL BLOCKS

Electricos' line of IEC Terminal Blocks are both innovative and user-friendly. They are simple to install and are color-coded for easy circuit identification. From standard feed-through spring clamp or screw clamp to disconnect, fuse holder, and power distribution terminal blocks, we've got what you need.
Electricos offers a comprehensive line of IEC Terminal Blocks, and each one of our products is designed and
manufactured to meet the needs of the machine builder.
VP600 PLOTTER SYSTEM


IEC/TERMINAL BLOCKS




HIGH DENSITY TERMINAL BLOCKS

Electricos' new line of High Density terminal blocks are both innovative and user-friendly. Available
in multiple terminal points from 4, 6, and 12 in a single molded housing, are simple to install, and
they carry an electrical rating of 30A @ 600V AC (UL/CSA) and 30A @ 750V AC (IEC).
Every Electricos product is designed and manufactured to meet the needs of the machine builder, including our new line of
High Density Terminal Blocks.
Electricos new line of High Density Terminal Blocks are rated 600 volts, 30 amperes continuous service and will accommodate #18 to #10 AWG (0.34 - 4mm2) stranded or solid copper wire, single or parallel conductors of same size and type (stranded/ stranded or solid/solid only) per terminal and include captive wire clamps for use with wire or ring type connectors, as standard. Available panel mounting or DIN rail mounting (35mm x 7.5mm x 35mm x 15mm), any combination of High Density Terminal Blocks may be assembled next to one another on the same mounting rail. Individual blocks can quickly and easily be inserted or removed without disturbing adjacent blocks. Only a screwdriver is required for removal.
MARKERS ORIENTAION

LOWERCASE

UPPERCASE

VERTICAL

HORIZONTAL
ACCESSORIES

END BARRIER

DIN Rail
HIGH DENSITY TERMINAL BLOCKS
NEMA TERMINAL BLOCKS

Electricos' line of NEMA terminal blocks are both innovative and user-friendly. They are simple to install and
are color-coded for easy circuit identification. From standard feed-through screw clamp to disconnect
and fuse holder terminal blocks, we’ve got what you need.
Every Electricos product is designed and manufactured to meet the needs of the machine builder, including our
comprehensive line of NEMA Terminal Blocks.
NEMA TERMINAL BLOCKS
Electricos NEMA terminal blocks are rated 600 volts, 25-50 amperes continuous service and will accommodate #22 to two #12 AWG wires (0.34 - 4mm2) per terminal and include captive wire clamps for use with stranded or solid wire or ring type connectors, as standard. Our 50 ampere box type terminal block accepts #8 AWG wire. Any combination of DIN Rail Terminal Blocks may be assembled next to one another on the same mounting rail. Individual blocks can quickly and easily be inserted or removed without disturbing adjacent blocks. Only a screwdriver is required for removal.
- UL recognized rating for wire size shown. All terminal blocks, hardware and mounting rails are supplied in standard packages.
NEMA FEED THROUGH TERMINAL BLOCKS

DRTB25 (MODULAR)

DRTB25F (FLAT TOP)

DRTB50F (BOX TYPE W/COPPER COLLAR )
NEMA FUSIBLE TERMINAL BLOCKS

DRFTB6
NEMA DISCONNECTING TERMINAL BLOCKS

DRDTB

2 POINT JUMPER STRAP

FUSE PULLER

MARKING STRIPS

End Barrier

DIN Rail